02 · Compact Repair Bottle The 20ml size fits easily into a garage toolbox.
03 · DIY Touch-Up Use Intended for suitable small cosmetic plastic repairs.
SMALL GAPS NEED CONTROL
Reach the Spot Without Flooding the Area.
The slim red nozzle is designed to guide adhesive toward the repair gap, making it easier to control where the liquid goes.
Work in small amounts and protect nearby painted surfaces from accidental contact. Wipe away excess only as directed by the adhesive instructions.
A CLOSER LOOK
Designed for More Precise Touch-Ups.
A narrow application tip and compact bottle make the product convenient to handle during carefully planned repairs.
Precision application for narrow, accessible plastic repair areas.Suitable for minor cosmetic touch-ups when surface compatibility has been confirmed.
PREPARATION MATTERS
Better Results Start Before You Apply.
Adhesive performance depends on the materials involved, the cleanliness of the surfaces and the curing process.
Identify the plastic type, check the adhesive instructions and confirm that the repair area does not carry a structural or safety function.
A secure-looking cosmetic repair is not a substitute for replacing damaged mounting hardware.
TAKE IT STEP BY STEP
A Careful Approach to Minor Repairs.
Follow the product's supplied instructions for surface preparation, application and full curing time.
01 · Check & Prepare
Confirm surface compatibility. Clean and dry the repair area as instructed.
02 · Apply Carefully
Use the narrow tip to apply a controlled amount to the intended bonding surface.
03 · Allow Full Cure
Hold or clamp as directed. Do not stress the repaired area before full curing.
Important Safety Information Do not use adhesive as the sole repair for cracked mounting brackets, bumper retention systems, sensor housings or any structural or safety-related component. Seek professional repair when required. Check product warnings, ventilation requirements and curing instructions before use.
A SMALL GARAGE ESSENTIAL
Compact Enough for Your Toolbox.
The 20ml bottle is easy to keep alongside your everyday car-care and workshop supplies.
Choose the quantity that matches your anticipated minor touch-up needs, and keep the container sealed and stored as directed.
BEFORE YOU START
Frequently Asked Questions
What types of repairs is it intended for?
The product is marketed for minor bumper plastic edges and loose exterior trim. Confirm material compatibility and the suitability of each repair.
Can it replace a broken bumper clip?
No. Damaged clips, brackets or safety-critical mounting parts should be repaired or replaced using the vehicle manufacturer's approved method.
Will it damage painted surfaces?
Paint compatibility has not been independently verified. Avoid unintended contact with finished surfaces and follow the manufacturer's instructions.
How long does the adhesive take to cure?
The source page describes a fast initial grip but does not establish a verified complete curing time. Follow the instructions supplied with your bottle.
Is the repair suitable for driving?
Do not drive with loose or inadequately secured exterior parts. Confirm that all attachment points are safe and have been properly repaired.
How much adhesive is in one bottle?
Each bottle is listed as containing 20ml (approximately 0.68 US fl oz).